Product Attributes

Model No.: JRC-110MA TO-5

Brand: YM

Output: Dc

Relay Type: Telecom

Ambient Temperature: -55℃~85℃

Sinusoidalvibration: 15g,(10～2000)Hz

Random Vibration: 0.2g²/Hz,169.1m/s²

Cyclone: 4kPa

Coil Powerconsumption: Power consumption: (0.29 ~ 0.40) W Dielectric withstand voltage Normal atmospheric pressure: 500Vr.m.s., 50Hz Under low pressure: 125Vr.m.s., 50Hz Contact load and life Resistance, 1A,28 Vd.c., 2×10⁴ times Resistance, 0.5A,28 Vd.c., 1×10⁵ times Low level,

Dielectricwithstandvoltage: Normal atmospheric pressure: 500Vr.m.s., 50Hz Under low pressure: 125Vr.m.s., 50Hz Contact load and life Resistance, 1A,28 Vd.c., 2×10⁴ times Resistance, 0.5A,28 Vd.c., 1×10⁵ times Low level, (10-50) μA, (10-50) mV, 1×10⁵ times insulation resistance N o r

Contact Load Andlife: Resistance, 1A,28 Vd.c., 2×10⁴ times Resistance, 0.5A,28 Vd.c., 1×10⁵ times Low level, (10-50) μA, (10-50) mV,1×10⁵ times

Insulationresistance: ≥ 1 0 0 0 0 MQ

Contact Resistance: Initial value ≤100mQ Life test after ≤200mΩ

Weight: ≤2.3g

Tightness: Leakage rate ≤10³ Pa ·cm³/s

Military Metal 27V Relay JRC-110MA TO-5 Replacement for Teledyne 411D Series

Product Overview

The JRC-110MA Military Metal Relay represents precision-engineered replacement technology specifically developed as a direct form-fit-function substitute for the renowned Teledyne 411D series relays. Engineered with TO-5 package compatibility and 27V DC operation, this Military Metal Sealing Relay delivers authentic performance replacement for legacy military, aerospace, and high-reliability industrial systems where original Teledyne components are obsolete or unavailable, while maintaining the exact mechanical and electrical characteristics required for seamless system integration.

JRC-110MA TO-5 Military Metal Relay Teledyne 411D Replacement

Military Metal Relay JRC-110MA TO-5 Technical Specifications

JRC-110MA TO-5 Dimensional Comparison with Teledyne 411D

JRC-110MA TO-5 Electrical Performance Specifications

Technical Specifications

Direct Replacement Electrical Parameters

Replacement Designation: JRC-110MA (Replaces Teledyne 411D Series)
Package Compatibility: Standard TO-5 Configuration
Operating Voltage: 27V DC (Matching 411D Specification)
Coil Power Efficiency: 0.3-0.43W (Identical to Original)
Contact Configuration: Matches 411D Series Design
Contact Rating: 1A at 28V DC, Resistive Load

Performance Matching Characteristics

Contact Resistance: Initial ≤50mΩ; Post-life ≤200mΩ (Matches 411D)
Low Signal Performance: (10-50)μA at (10-50)mV capability
Operational Lifespan: 1×10⁶ operations at rated conditions
Switching Performance: Operate Time ≤4ms; Release Time ≤4ms
Minimum Control Pulse: 10-50ms activation requirement

Environmental & Physical Specifications

Dielectric Strength: 500V RMS (normal); 250V RMS (low pressure)
Insulation Performance: >500MΩ (initial); >50MΩ (post-endurance)
TO-5 Package Weight: <3 grams (Identical to 411D)
Hermetic Seal Integrity: Leakage rate ≤10⁻³ Pa·cm³/s
Temperature Range: -55°C to +125°C (Matches Military Spec)
Mechanical Dimensions: Exact TO-5 package compatibility

Product Features & Advantages

Authentic Teledyne 411D Series Replacement

The JRC-110MA is engineered as a direct drop-in replacement for Teledyne 411D series relays, maintaining exact TO-5 package dimensions, pin configuration, and electrical characteristics. This authentic replacement capability provides a reliable solution for systems where original Teledyne components are no longer available, surpassing the compatibility of generic Aviation DC Relays or standard PCB Board Relays.

TO-5 Package Standardization

Featuring industry-standard TO-5 packaging, this relay maintains compatibility with existing PCB layouts, mounting hardware, and thermal management systems designed for the original 411D series. This standardization ensures seamless integration without circuit redesign, unlike many modern Automotive Relays or specialized Flash Relays with different form factors.

Enhanced Reliability Over Original Design

While maintaining exact mechanical and electrical compatibility, the JRC-110MA incorporates modern manufacturing techniques and material improvements that enhance reliability beyond the original 411D design. These improvements include advanced contact materials for reduced wear and enhanced coil insulation for longer service life.

YUMU Electronics Replacement Expertise

Our specialized knowledge in legacy component replacement, developed through extensive work with Military Electromagnetic Relays and Sealed Magnetic Latching Relays, ensures that each JRC-110MA provides authentic performance while incorporating modern reliability enhancements unavailable in the original design.

Application Scenarios

Legacy Military & Aerospace Systems

Vintage Military Electronics: Systems originally designed with Teledyne 411D components
Legacy Aircraft Avionics: Older generation aircraft control and navigation systems
Military Communication Equipment: Secure communication systems from previous generations
Test & Measurement Systems: Laboratory and field test equipment requiring 411D compatibility

High-Reliability Industrial Systems

Industrial Control Systems: Manufacturing and process control equipment
Medical Equipment Electronics: Legacy medical diagnostic and treatment systems
Telecommunications Infrastructure: Older generation communication network equipment
Power Management Systems: Power distribution and control equipment
Metal Sealed Military Relay JRC-110MA TO-5
Military Metal 27V Relay JRC-110MA TO-5 Replace of Teledyne Brand 411D Series
Military Metal Relay JRC 110MA TO-5 Replace 411D Teledyne
Metal Relay JRC 110MA TO-5 Replace 411D Teledyne
Aviation Relay for Drone,Aircraft Engine
High quality Aviation Engine,Train,Plane.

System Sustainment & Maintenance

Equipment Life Extension: Keeping legacy systems operational beyond original design life
Obsolescence Management: Solving end-of-life component challenges in critical systems
Historical System Restoration: Museum and heritage equipment restoration projects
Training System Maintenance: Simulators and training equipment using original components

Installation & Replacement Guidelines

Direct Replacement Procedure

Original Component Verification: Confirm existing component is Teledyne 411D series
System Documentation Review: Check original system schematics and documentation
Safe System Preparation: Implement proper system de-energization and safety procedures
Original Component Removal: Carefully remove existing 411D relay from circuit
Compatibility Confirmation: Verify JRC-110MA matches all mechanical and electrical parameters
Direct Installation: Install JRC-110MA using same mounting and connection methods
System Functional Testing: Test system operation with new component installed
Documentation Update: Record component replacement in system maintenance records

Important Replacement Considerations

Verify pin-for-pin compatibility before installation
Maintain proper ESD protection during handling
Use appropriate tools for TO-5 package installation
Verify thermal management matches original design
Test system functionality across full operational range

Procurement Value Proposition

Strategic Supply Chain Advantages

Obsolescence Solution: Reliable replacement for discontinued Teledyne components
Reduced System Downtime: Immediate availability versus searching for NOS (New Old Stock)
Cost-Effective Sustainment: New manufacture reliability at competitive pricing
Long-Term Support: Sustainable supply for ongoing maintenance requirements

Technical & Operational Benefits

Authentic Performance: Electrical characteristics match original specifications
Enhanced Reliability: Modern manufacturing improves upon original design
Documentation Support: Comprehensive technical data for system integration
Quality Assurance: Consistent manufacturing quality versus variable surplus components

Standards Compliance & Quality Assurance

The JRC-110MA is manufactured to meet or exceed original Teledyne 411D specifications:

Original Teledyne 411D Series Performance Specifications
TO-5 Package Mechanical Standards
Military Hermetic Sealing Requirements
ISO 9001:2015 Quality Management System
Environmental Testing to Military Standards
100% Performance Verification Testing

YUMU Electronics maintains specialized expertise in legacy component replacement, applying rigorous quality controls developed through manufacturing Polarized Relay JH-2S, Industrial Power Relays, and other specialized military components.

Customization & Special Requirements

While the JRC-110MA is designed as a direct replacement, we offer specialized services:

Documentation Packages: Custom technical data matching original specifications
Enhanced Testing Protocols: Additional verification testing per customer requirements
Lot Traceability: Specialized tracking for critical system applications
Marking & Identification: Custom labeling matching original component appearance
Packaging Solutions: Specialized packaging for military or aerospace requirements

Our engineering team can develop custom replacement solutions for other obsolete components, leveraging experience from producing Solid State Relays and Intermediate Power Relays for legacy system support.

Legacy Component Production Process

Authentic Replacement Manufacturing

Each JRC-110MA undergoes specialized manufacturing to ensure authentic replacement capability:

Original Specification Analysis: Detailed study of Teledyne 411D specifications
Material Compatibility Verification: Materials matching or exceeding original performance
TO-5 Precision Manufacturing: Components produced to exact original dimensions
Authentic Assembly Processes: Assembly methods maintaining original characteristics
Performance Matching Testing: Verification against original 411D specifications
Quality Verification: Final inspection ensuring replacement compatibility

Replacement Quality Assurance

Dimensional verification against original specifications
Electrical performance matching original characteristics
Environmental testing to original requirements
Long-term reliability testing beyond original specifications
Documentation matching original technical data
Traceability systems for replacement component tracking

Frequently Asked Questions

Is the JRC-110MA truly a direct drop-in replacement for Teledyne 411D relays?

Yes, the JRC-110MA is engineered as a direct form-fit-function replacement with identical TO-5 package dimensions, pin configuration, electrical characteristics, and performance specifications, ensuring seamless integration without circuit modifications.

What testing verifies compatibility with original 411D components?

Each production batch undergoes comprehensive testing including dimensional verification, electrical parameter matching, environmental testing to original specifications, and functional testing in circuits designed for 411D relays to validate replacement compatibility.

How does this compare to modern DPDT 8Pin 27V Relay designs?

While modern DPDT 8Pin 27V Relay designs offer different configurations and packages, the JRC-110MA specifically maintains the TO-5 package and electrical characteristics of the original Teledyne 411D series for legacy system compatibility where package standardization is critical.

What is the lead time for Teledyne 411D replacement components?

We maintain production capability for legacy replacement components with typical lead times of 4-6 weeks. Priority production can be arranged for urgent system sustainment requirements.

Can you provide replacements for other obsolete Teledyne or military components?

Yes, our engineering team specializes in legacy component replacement and can develop solutions for various obsolete military and Aerospace Components based on customer requirements and available technical documentation.