High-Reliability Interconnect for Demanding Aerospace Systems
Product Overview
The Military Aviation Connector JY27467T19F35PN is engineered to deliver exceptional reliability in the most challenging military and aerospace environments. This connector embodies the pinnacle of aviation connector with military grade quality, designed specifically for applications where performance cannot be compromised. As a robust military connector for aviation use, it provides secure electrical connections for critical systems, ensuring uninterrupted signal and power transmission under extreme conditions of vibration, temperature fluctuation, and environmental exposure. Its advanced design meets the rigorous demands of modern military aircraft systems, making it an indispensable component for mission-critical applications.
Product Features & Advantages
The JY27467T19F35PN offers superior performance through its advanced engineering and robust construction:
- Enhanced F-Series Coupling Mechanism: Features a specialized coupling system designed for secure, vibration-resistant connections with positive locking, ensuring reliable performance in high-stress military aviation environments.
- Superior Environmental Sealing: Incorporates multi-stage sealing technology that provides exceptional protection against moisture, dust, sand, and fluids, maintaining integrity across varying atmospheric pressures from ground level to high altitude.
- High-Performance Contact System: Utilizes precision aviation grade terminals with advanced plating to ensure ultra-low contact resistance and reliable electrical performance over 100,000 mating cycles.
- Robust Mechanical Design: Engineered with durable materials and construction techniques to withstand extreme mechanical stress, shock, and vibration, far exceeding the capabilities of standard general aviation plugs.
- Excellent Electrical Characteristics: Provides high dielectric strength and insulation resistance, ensuring signal integrity and preventing electrical leakage in complex aerospace electrical connectors networks.
- Lightweight & Optimized Construction: Designed with weight optimization in mind, achieving less than 3 grams total weight while maintaining the structural integrity required for a military aviation plug.
This connector represents a true aviation type military spec connector plug, manufactured under strict adherence to comprehensive army aviation quality control regulations and precise military connector specifications.
Technical Specifications
The JY27467T19F35PN's performance is defined by exacting engineering parameters:
- Model Designation: JY27467T19F35PN Series Connector.
- Coil Power Consumption: 0.3 to 0.43 Watts operational range.
- Contact Performance & Durability:
- Standard Load Rating: 1 Ampere at 28V DC, minimum 100,000 cycles.
- Low-Level Signal Capability: Compatible with (10~50) μA at (10~50) mV signals for 100,000 cycles.
- Contact Resistance:
- Initial Maximum: ≤ 50 milliOhms per contact.
- Maximum After Life Testing: ≤ 200 milliOhms per contact.
- Dynamic Response Parameters:
- Action Time: ≤ 4 milliseconds.
- Release Time: ≤ 4 milliseconds.
- Actuation Pulse Width: Adjustable from 10 to 50 milliseconds.
- Dielectric Withstanding Voltage:
- Standard Pressure Conditions: 500 Vr.m.s., 50Hz.
- Low Pressure Conditions: 250 Vr.m.s., 50Hz.
- Insulation Resistance:
- Initial: > 500 MegaOhms.
- After Environmental Stress: > 50 MegaOhms.
- Weight: < 3 grams (complete connector assembly).
- Hermetic Sealing Performance: Maximum leakage rate ≤ 1 x 10-3 Pa·cm³/s.
- Electrical Coil Specifications: All electrical ratings referenced at 25°C standard temperature.
Application Scenarios
The JY27467T19F35PN is designed for demanding military aerospace applications where reliability is paramount:
- Military Aircraft Avionics Systems: Critical interconnections within flight control computers, navigation systems, and communication equipment.
- Engine Control & Monitoring Systems: Reliable connections for engine sensors, fuel management systems, and control actuators in high-vibration environments.
- Weapon & Defense Systems: Interfaces for missile control systems, electronic warfare equipment, and defensive aid systems.
- Ground Support & Maintenance Equipment: Durable connectors for test benches, diagnostic systems, and power distribution units servicing military aircraft.
- Unmanned Aerial Systems: Critical power and data connections in UAVs where reliability and weight optimization are essential for mission success.
Implementing this connector enhances system reliability, reduces maintenance requirements, and ensures consistent performance in mission-critical military applications.
Installation and Operational Procedure
Follow these essential steps for proper installation and operation of the JY27467T19F35PN connector:
- Pre-Installation Inspection: Thoroughly examine the aviation connector plug and mating military Aviation Socket for any damage, contamination, or bent pins. Clean if necessary using approved methods.
- Cable Preparation & Termination: Use proper aviation connector soldering techniques or certified crimping tools for aviation grade terminals. Follow the specific wiring diagram for pin assignments.
- Connector Assembly: Carefully insert the terminated contacts into their designated cavities in the connector housing, ensuring each is fully seated and locked in place.
- Mating Operation: Align the connector key with the socket keyway. Insert and engage the F-series coupling mechanism until a positive lock is achieved (typically indicated by an audible click or firm stop).
- Verification & Testing: Perform continuity checks on all circuits, verify insulation resistance, and conduct functional testing of the connected system under operational conditions.
Certifications & Compliance
The JY27467T19F35PN is manufactured under a comprehensive quality management system designed to meet and exceed the requirements of relevant military and aerospace standards. Our production processes adhere to the principles of major army aviation quality control regulations, ensuring each connector delivers the performance, traceability, and reliability demanded for defense applications.
Customization Options
We offer extensive customization capabilities for the JY27467T19F35PN platform to meet specific application requirements:
- Contact Configuration: Custom pin layouts, mixed contact types (signal, power, filtered), and specialized contact plating options.
- Environmental Enhancements: Special shell finishes, high-temperature seals, corrosion-resistant treatments, and EMI shielding options.
- Backshell & Cable Interface: Various backshell configurations, materials, and integrated strain relief solutions tailored to specific installation requirements.
- Complete Cable Assemblies: Turnkey custom cable harness manufacturing with specified lengths, cable types, shielding, and connector integration.
- Documentation & Identification: Custom part numbering, laser marking, serialization, and provision of detailed technical documentation.
Production Process & Quality Assurance
Every JY27467T19F35PN connector undergoes rigorous manufacturing and testing processes. From precision machining of components to automated assembly of aviation grade terminals, each step is carefully controlled and monitored. Our comprehensive quality assurance includes 100% electrical testing (contact resistance, insulation resistance, dielectric strength), dimensional verification, and environmental testing on production samples. This ensures each military type connector meets the highest standards for performance and reliability as aviation grade connectors.
Frequently Asked Questions (FAQ)
- Q: What differentiates the F-series coupling mechanism from other coupling styles?
A: The F-series coupling is specifically engineered for applications requiring high vibration resistance and secure locking. It typically features a robust design with multiple locking points that prevent inadvertent disconnection under extreme mechanical stress, making it ideal for military Aviation Applications. - Q: Is this connector compatible with existing military aircraft systems?
A: The JY27467T19F35PN is designed to meet standard military interface requirements. Compatibility with specific existing systems depends on the mating interface specifications. We provide detailed technical documentation to facilitate compatibility assessment and system integration. - Q: What temperature range can this connector withstand?
A: While electrical ratings are specified at 25°C, the connector is designed to operate reliably across extended military temperature ranges, typically from -55°C to +125°C or higher, depending on specific material configurations. - Q: Can you provide connectors with specialized shielding for EMI/RFI protection?
A: Yes, we offer versions with enhanced EMI/RFI shielding, including conductive shell finishes, shielded backshells, and integrated filter contacts for comprehensive electromagnetic compatibility. - Q: What is the expected service life of this connector in typical military aviation applications?
A: With proper installation and maintenance, the JY27467T19F35PN is designed for a service life that matches or exceeds the lifecycle of the military platforms it serves, supported by its 100,000-cycle contact rating and robust environmental sealing.
Contact Now