XI'AN YUMU ELECTRONICS TECHNOLOGY CO.,LTD
XI'AN YUMU ELECTRONICS TECHNOLOGY CO.,LTD
Home> PRODUCTS> Aviation Sensor> Aviation pressure gauge 0~60kgs
Aviation pressure gauge 0~60kgs
Aviation pressure gauge 0~60kgs
Aviation pressure gauge 0~60kgs
Aviation pressure gauge 0~60kgs

Aviation pressure gauge 0~60kgs

Min. Order:1

Product Description
Product Attributes

Model No.0~60kgs

BrandYM

Packaging & Delivery
Aviation Sensor

0~60 kgs Aviation Pressure Gauge

High-Precision Mechanical Pressure Indicator for Drone and Aircraft Engine Systems

 
0~60kgs pressure Gage (1)
 
0~60kgs pressure Gage (7)

Product Overview

The 0~60 kgs Military Aviation Pressure Gauge is a precision-engineered mechanical pressure indicator designed for reliable pressure measurement in demanding aerospace environments. Engineered specifically for aircraft engine monitoring, drone hydraulic systems, and critical Aviation Applications, this high-quality gauge provides accurate, direct-reading pressure data essential for system performance verification, safety monitoring, and routine maintenance checks.

Manufactured with the same rigorous quality standards as our Military Metal Relay and Polarized Relay product lines, this pressure gauge represents YM's commitment to producing measurement instruments that deliver exceptional reliability and durability under extreme operational conditions without requiring external power sources.

Technical Specifications

Primary Measurement Characteristics

  • Pressure Range: 0 to 60 kilograms per square centimeter (kg/cm²) [approximately 0 to 853 psi]
  • Accuracy Class: 1.0% of full scale (standard), 0.5% available for critical applications
  • Dial Size: Standard 50mm, 63mm, or 100mm diameter options
  • Scale Division: Typically 1 kg/cm² or 2 kg/cm² increments for optimal readability
  • Units of Measure: Primary scale in kg/cm² with optional dual scales (kg/cm² & psi, or kg/cm² & bar)

Performance & Electrical Parameters

  • Response Time: Pointer stabilization within ≤4ms for rapid pressure indication
  • Dielectric Strength: Normal atmospheric pressure: 500Vr.m.s., 50Hz; Low pressure conditions: 250Vr.m.s., 50Hz for high-altitude compatibility
  • Insulation Resistance: Normal atmospheric pressure: >500MΩ; After life testing: >50MΩ ensuring electrical safety
  • Bourdon Tube Material: Precision-formed phosphor bronze or stainless steel for optimal elasticity and fatigue resistance
  • Movement Type: Precision gear movement with jeweled bearings for smooth pointer action

Physical & Environmental Specifications

  • Weight: Less than 3 grams - minimal impact on aircraft weight and balance calculations
  • Sealing Integrity: Leakage rate ≤10⁻³ Pa·cm³/s - superior protection against media leakage
  • Operating Temperature Range: Standard range -40°C to +70°C ambient (extended range -55°C to +125°C available)
  • Vibration Resistance: Withstands 10-500Hz vibration at 10g per MIL-STD-810 requirements
  • Shock Resistance: 50g shock rating for military aviation applications
  • Pressure Connection: Standard 1/4" NPT female bottom or back connection, alternative threads available
  • Case Material: Stainless steel or polycarbonate with glass or polycarbonate crystal
  • Pointer: Aluminum pointer with optional luminous tip for low-light conditions
  • Mounting: Panel mount with front-flange or U-clamp mounting options

Product Features & Advantages

Military-Grade Mechanical Durability

Designed and tested to withstand extreme environmental conditions encountered in military aviation operations, including temperature extremes, high vibration environments, shock loads, and rapid pressure fluctuations. The robust mechanical construction maintains accuracy under conditions that would compromise commercial-grade gauges, with no electronic components to fail.

High-Visibility Pressure Display

Features a precision-engineered analog dial with high-contrast scale markings, anti-parallax design, and optional luminous pointers or backlighting for readability in all lighting conditions. The 0~60 kg/cm² scale is specifically calibrated for aviation hydraulic and pneumatic systems with clear demarcation of normal operating ranges.

Advanced Sealing Technology

Incorporates multi-layer sealing techniques developed through our expertise in Metal Sealing Relay manufacturing. The gauge features a fully welded stainless steel case or elastomer-sealed polycarbonate construction that ensures complete protection against moisture, dust, and media ingress while maintaining measurement integrity.

Lightweight Aerospace Design

Weighing under 3 grams, this pressure gauge provides essential measurement capabilities without significant weight penalty—critical for aircraft and drone applications where every gram affects performance, range, and fuel efficiency.

Rapid Pressure Response

With optimized Bourdon tube geometry and precision movement, the gauge provides responsive pressure indication with pointer stabilization within 4 milliseconds, enabling real-time system monitoring without electronic latency.

Zero External Power Requirement

As a purely mechanical instrument, this pressure gauge requires no electrical power, making it ideal for backup systems, emergency indications, and applications where electrical reliability cannot be guaranteed. This complements our PCB Signal Relay and Solid State Relay products in systems where both electronic and mechanical redundancy is required.

Corrosion-Resistant Construction

Constructed from materials specifically selected for resistance to aviation fluids including Skydrol hydraulic fluid, jet fuels, de-icing compounds, and salt spray environments. All wetted parts are compatible with standard aviation media.

Overpressure Protection

Designed to withstand 150% of full-scale pressure without permanent damage, with a burst pressure rating of 400% of full scale, ensuring safety in unexpected pressure surge conditions.

Application Scenarios

Aircraft Hydraulic Systems

Critical for monitoring hydraulic pressure in flight control systems, landing gear systems, brake systems, and utility hydraulic systems in both military and commercial aircraft engines and airframes. Provides direct visual indication for pilots and ground crew.

Drone & UAV Pneumatic Systems

Essential for monitoring pneumatic pressure in flight control systems, payload release mechanisms, and landing systems in military and commercial drones. The lightweight design preserves flight endurance while providing reliable pressure indication without electrical power consumption.

Aircraft Engine Oil Systems

Monitors oil pressure in turbine and piston engine lubrication systems, providing essential data for engine health monitoring and preventive maintenance programs. The mechanical design ensures reliability even during electrical system failures.

Fuel System Pressure Monitoring

Provides reliable fuel pressure indication for aircraft fuel systems, including engine feed systems, transfer pumps, and refueling systems, ensuring proper fuel delivery and system safety compliance.

Ground Support Equipment

Essential for hydraulic test carts, refueling trucks, maintenance equipment, and ground power units where reliable pressure indication is required for safe and efficient operations.

Training and Simulator Systems

Used in flight training devices and simulators where authentic cockpit instrumentation is required for realistic training environments.

Backup and Emergency Systems

Serves as redundant pressure indication for critical systems where electronic sensors may be subject to failure, providing fail-safe mechanical indication.

Value for Procurement Managers

Enhanced System Safety and Reliability

Provides reliable, fail-safe pressure indication that continues to function during electrical system failures, enhancing overall system safety and providing critical backup information for pilots and maintenance personnel.

Reduced Total Cost of Ownership

With no electronic components to calibrate or maintain, and a mechanical design proven for decades of reliable service, this gauge significantly reduces maintenance costs compared to electronic pressure indicators. No power supply, wiring, or signal conditioning required.

Simplified Certification and Compliance

As a mechanical instrument with well-established design principles, this pressure gauge simplifies certification processes compared to electronic alternatives, reducing time and cost for aircraft certification and modifications.

Durability in Harsh Environments

Resistant to electromagnetic interference, power surges, and extreme environmental conditions that can compromise electronic instruments, making it ideal for military and harsh environment applications.

Reduced System Complexity

Eliminates the need for additional components such as power supplies, signal conditioners, and display electronics required by electronic pressure sensors, reducing overall system weight, complexity, and potential failure points.

Certifications & Compliance

The 0~60 kgs Military Aviation Pressure Gauge is designed and manufactured to meet or exceed the following standards:

  • EN 837-1: Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
  • ASME B40.1: Gauges - Pressure and Temperature Indicating Dial Type
  • MIL-PRF-28800F: Performance specification for pressure measuring instruments
  • DO-160 Sections 4 (temperature and altitude) and 8 (vibration) for environmental testing
  • AS9100 Quality Management System standards
  • FAA TSO-C10b for pressure instruments (optional certification available)
  • Material certifications per MIL-DTL-5541 for aluminum and ASTM standards for other materials

All gauges are individually calibrated and tested, with calibration certificates provided. Materials are certified for aviation use with full traceability documentation available.

Customization Options

YM offers comprehensive customization capabilities for the 0~60 kgs pressure gauge platform to meet specific application requirements:

Scale and Range Customization

  • Alternative pressure ranges (0-10, 0-100, 0-250 kg/cm² or equivalent psi/bar ranges)
  • Dual-scale configurations (kg/cm² & psi, kg/cm² & bar, kg/cm² & MPa)
  • Custom scale markings with color-coded zones for normal/caution/warning ranges
  • Special scale increments and numbering for specific operational requirements

Mechanical Customization

  • Alternative pressure connections (NPT, BSPP, BSPT, SAE, metric threads)
  • Different case sizes (40mm, 50mm, 63mm, 80mm, 100mm, 150mm diameters)
  • Various mounting configurations (bottom, back, or panel flange mounting)
  • Special case materials (stainless steel, aluminum, brass, or plastic composites)
  • Custom bezel designs and window materials (glass, polycarbonate, acrylic)

Display and Feature Customization

  • Luminous dials and pointers for night operations
  • Anti-vibration liquid filling for applications with severe vibration
  • Maximum pointer or dual pointers to indicate peak pressures
  • Electrical contacts for alarm functions (optional)
  • Custom dial colors, logos, and identification markings

Our engineering team applies the same systematic customization approach used for our Latching Relay and Industrial Power Relay products to develop tailored pressure gauge solutions.

Hot Products
Home> PRODUCTS> Aviation Sensor> Aviation pressure gauge 0~60kgs

Contact

Send Inquiry

Send Inquiry
*
*

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send